Biopolymers Used to 3D Print Large-scale Marine Fender


As discussed in our series on the role of 3D printing and polymers in (averting or contributing to) ecological collapse, biopolymers may be a crucial factor in the equation to maintain some semblance of post-industrial society that can coexist with life on Earth. Now, the SeaBioComp project has demonstrated the possibilities of 3D printing biopolymers for large-scale industrial use.
The many members of the EU-funded Interreg initiative opted to produce a fender used to protect structures when berthing and guiding ships. In order to replace tropical wood and synthetic plastics in fender construction, the team explored the use of two materials, recycled PETG with glass fiber reinforcement (rPETG-GF30) and thermoplastic starch polymer (TSP).

A berthing structure with traditional fenders. Image courtesy of De Klerk Waterbouw.

Project member De Klerk Waterbouw , a specialist in the installation of marine products, outlined the design requirements for the component. This included a width of 400 mm, a base that allows it to slide into an auxiliary structure, an open cavity that can be filled with materials to improve impact resistance and energy absorption.

The CFAM 3D printer from CEAD. Image courtesy of CEAD.

A sample fender unit made from a combination of TPS and PLA was printed by Dutch composite production company Poly Products using a large-scale 3D printer from CEAD . The structure underwent material testing by the University of Portsmouth and mechanical testing by De Klerk Waterbouw, which reported promising results. The next step is for a further optimization of the design, materials and production process before a full-scale fender is made.

The 3D-printed fender prototype made with a TSP-PLA blended bioplastic. Image courtesy of SeaBioComp.

The findings from the material testing led by the University of Portsmouth and mechanical testing by De Klerk Waterbouw show very promising results and further optimization of designs, materials and production may lead to future full-scale production. This will lead to the installation of a full-scale, 3D-printed fender to test the performance of the structure in the field.
As discussed in our story on TSPs , these materials are difficult to process and brittle at room temperature. Made from starches themselves (as opposed to the lactic acid derived from starches, like PLA), TSPs are usually blended with other plasticizers. In this case, the TSP was mixed with PLA, which has is its own ecological issues but demonstrates strong promise over petrochemical polymers if it can be grown and harvested sustainably.
Because chemical companies are investing in fossil fuel-based plastics (in addition to biopolymers) in part to hedge their bets on a global transition to renewable energy (which also has its own ecological issues), there is a need to demonstrate the viability of biopolymers in...

Top