arduino controller area network
#arduino
#controller area network
#CAN bus
#communication
#microcontroller
#automotive
#data transmission
#embedded systems
No description available.
Arduino Controls an Infrared Helicopter
The 2N3904 is an NPN transistor. When observing the flat face of the transistor, the left lead is the Emitter (pin 1 in the schematic), the middle lead is the Base (pin 2 in the schematic), and the right lead...
integrated circuit Improving absolute precision of ADC to balance battery voltage
Utilize a high-performance microcontroller (Piccolo TMS320F28035, 12-bit resolution, +/- 4 LSB offset, +/- 60 LSB gain) to measure the voltage across stacked battery cells and control related analog electronics for charge equalization. The microcontroller will also save data in EEPROM...
Controlling a LED using a switch
To create the circuit, connect a switch as an input and an LED as an output to the Arduino. The components required include a switch, an LED, a 10kΩ resistor, a 470Ω resistor, a blue or yellow jumper wire, and...
sensor Arduino analog signal read problem
The piezo element is connected solely to Channel 1 (Arduino A[0] port). Channels 1 through 6 are linked to female mono jacks, with the ground (GND) wiring arranged in series from jacks 1, 2, and 3, continuing to the end...
Pressure Activated Light-Up Umbrella using an Arduino
Inspired by a previous project, a unique design was developed that incorporates an umbrella capable of playing musical notes when pressed. For additional information regarding the 4051 chip, which functions as a multiplexer or demultiplexer, refer to resources available on...
Arduino Motion Detector Circuit
Once the motion sensor detects motion, the Arduino can be programmed to activate an LED, turn on a motor, sound a buzzer, etc. In this circuit, for simplicity, an LED will be turned on when the motion sensor detects movement....
Auto-Fill Valve with Arduino
Part fill valves are commonly utilized in rainwater tanks. The valve activates when the water level in the tank drops to a low position.
Part fill valves play a crucial role in the management of water levels in rainwater harvesting systems....
two wire arduino knight rider
Connect eight LEDs to an Arduino and create a Knight Rider display using only two Arduino pins in this tutorial. This is achieved by utilizing a PCF8574 I/O expander IC.
To implement the Knight Rider display using an Arduino and a...
Handy Cricket Hardware Description
This document presents an overview of the hardware design of the Handy Cricket.
The Handy Cricket is a compact electronic device designed for educational and recreational purposes, primarily aimed at children. The hardware design incorporates various components that work together to...