Radio alarm clock
#PIC16F874
#touch buttons
#AD converter
#DCF module
#alarm clock
#radio
#light measurement
#TTL signal
Description: The program utilizes the built-in analog-to-digital (AD) converter of the PIC16F874 microcontroller for sensing touch buttons. The PIC features eight AD ports, with seven designated for the touch buttons and one for light measurement. To receive DCF signals, a DCF module (e.g., Conrad part number 641138 - 89) must be added, which outputs a digital TTL level DCF signal interpreted by the software to automatically adjust the time. When using the Conrad module, pin 1 connects to ground, pin 2 connects to +5VDC, and pin 3 (DCF-out) connects to pin 6 of the PIC. The LCD backlight can be dimmed either manually or automatically, based on ambient light levels. This is achieved using a light-dependent resistor (LDR) as a light sensor, in conjunction with the pulse-width modulation (PWM) capabilities of the microprocessor.
The circuit design incorporates a PIC16F874 microcontroller, which serves as the central processing unit for handling input from touch buttons and processing DCF time signals. The microcontroller's eight AD ports facilitate the connection of seven touch buttons and one LDR for light measurement. Each touch button is connected to an individual AD port, allowing for precise analog readings that correspond to user interactions.
The integration of the DCF module is crucial for time synchronization. The module outputs a digital signal, which is received by the microcontroller on pin 6. The connections are straightforward: the ground pin of the DCF module connects to the system ground, the power pin connects to a +5V supply, and the DCF-out pin provides the time signal to the microcontroller. This setup allows the software to interpret the DCF signal and adjust the internal clock of the PIC accordingly.
For the LCD backlight control, the LDR is placed in a voltage divider configuration with a fixed resistor, allowing the microcontroller to measure the voltage across the LDR. The PWM functionality of the PIC16F874 is employed to adjust the brightness of the LCD backlight based on the voltage reading from the LDR. This creates an adaptive lighting system that enhances visibility in varying ambient light conditions, improving user experience.
Overall, this design effectively combines touch sensing, timekeeping, and adaptive lighting into a cohesive system, leveraging the capabilities of the PIC16F874 microcontroller and external components to create a responsive and user-friendly interface.The program makes use of the built-in AD converter of the PIC16F874 for sensing the touch buttons. The PIC has 8 AD ports, seven are used for the 7 touch-buttons, 1 is used for the light measurement. In order to receive DCF signals, you have to add a DCF module (e. g. Conrad nr. 641138 - 89) which will provide a digital TTL level DCF signal which i s than interpreted by the software to automatically adjust the time. If you use the Conrad module, pin 1 of this module goes to ground, pin 2 to +5VDC and pin 3 (DCF-out) to pin 6 of the PIC. The backlight of the LCD can be dimmed either manually or automatically, proportional to the ambient light.
This is done using an LDR as a light sensor and the PWM capability of the microprocessor.
The circuit design incorporates a PIC16F874 microcontroller, which serves as the central processing unit for handling input from touch buttons and processing DCF time signals. The microcontroller's eight AD ports facilitate the connection of seven touch buttons and one LDR for light measurement. Each touch button is connected to an individual AD port, allowing for precise analog readings that correspond to user interactions.
The integration of the DCF module is crucial for time synchronization. The module outputs a digital signal, which is received by the microcontroller on pin 6. The connections are straightforward: the ground pin of the DCF module connects to the system ground, the power pin connects to a +5V supply, and the DCF-out pin provides the time signal to the microcontroller. This setup allows the software to interpret the DCF signal and adjust the internal clock of the PIC accordingly.
For the LCD backlight control, the LDR is placed in a voltage divider configuration with a fixed resistor, allowing the microcontroller to measure the voltage across the LDR. The PWM functionality of the PIC16F874 is employed to adjust the brightness of the LCD backlight based on the voltage reading from the LDR. This creates an adaptive lighting system that enhances visibility in varying ambient light conditions, improving user experience.
Overall, this design effectively combines touch sensing, timekeeping, and adaptive lighting into a cohesive system, leveraging the capabilities of the PIC16F874 microcontroller and external components to create a responsive and user-friendly interface.The program makes use of the built-in AD converter of the PIC16F874 for sensing the touch buttons. The PIC has 8 AD ports, seven are used for the 7 touch-buttons, 1 is used for the light measurement. In order to receive DCF signals, you have to add a DCF module (e. g. Conrad nr. 641138 - 89) which will provide a digital TTL level DCF signal which i s than interpreted by the software to automatically adjust the time. If you use the Conrad module, pin 1 of this module goes to ground, pin 2 to +5VDC and pin 3 (DCF-out) to pin 6 of the PIC. The backlight of the LCD can be dimmed either manually or automatically, proportional to the ambient light.
This is done using an LDR as a light sensor and the PWM capability of the microprocessor.
Desheng 119 700 High sensitivity l2-band stereo radio circuit diagram
The circuit diagram for the Desheng 119 700 type FM, TV sound, medium wave, and short wave high sensitivity L2-band stereo radio is presented below.
The Desheng 119 700 type radio circuit is designed to receive various frequency bands including FM,...
Interfacing MaxTrac Mobile Radios to Repeater Controllers
This article outlines a reliable, straightforward, and universal method for interfacing Motorola mobile radios from the MaxTrac, Radius, and GM300 series with common repeater controllers. The information provided is also relevant for radio interfaces used in IRLP or EchoLink applications....
Farnsworth Model GT-051 Bakelite Radio (1948)
"Black Beauty" is a nickname for a classy Bakelite radio set. It features a dramatic, asymmetrical design with deep wraparound louvers and a bullet-like profile, exemplifying 1940s Streamline design. The radio is undergoing restoration of its electronics and cabinet. Originally,...
Radio remote control circuit
The receiver circuit depicted in the figure requires the insertion of a plug into the radio headphone jack. When the radio receiver detects a signal from the transmitter, an audio signal is output from the jack. This signal is then...
C0QBmk~%24(KGrHqIOKkIEq4M%2Bu,)1BK2zHH580Q~~_35.gif "schematic of programmer radio circuit")
schematic of programmer radio
This time, information will be shared about the schematics of radios, specifically the schematic of a programmer radio, along with the latest information available on Onmilwiki.
The schematic of a programmer radio typically includes various components essential for its operation, such...
Desheng 1012 12-band television sound radio circuit diagram
Desheng 1012 is a 12-band radio circuit diagram that covers FM, MW, SW, and TV sound frequencies.
The Desheng 1012 radio circuit is designed to receive a wide range of frequencies across multiple bands, including FM (Frequency Modulation), MW (Medium...
PA1B-02 page of VERON department Nieuwegein and surroundings
Information for radio broadcasting and amateur listening in the VERON department of Nieuwegein (A29) and surrounding areas.
The radio broadcasting and listening activities in the VERON department of Nieuwegein (A29) encompass a variety of amateur radio operations, which serve both hobbyists...
Energy-sucking Radio Antennas
Here's something that has always bugged me: light waves are about 5000 Angstroms in wavelength, while atoms are more like 1 Angstrom across. Atoms are thousands of times smaller than light waves, yet atoms obviously interact very strongly with light....
Desheng R-202T type two-band radio circuit diagram
The circuit diagram of the Desheng R-202T type two-band radio is as follows.
The Desheng R-202T is a two-band radio receiver designed to operate on both AM and FM frequencies. The circuit typically includes several key components that facilitate the tuning...