Stepper Motor Experiments
#stepper motor
#motor driver
#microcontroller
#Arduino
#PWM
#H-bridge
#control circuit
#precision control
#DIY robotics
#experimental
No description available.
arduino buzzer
Connecting a buzzer to an Arduino when the buzzer operates at a different voltage than the Arduino involves using an NPN transistor to interface between the two.
To implement this circuit, the following components are required: an Arduino board, a buzzer...
Keep The Ramp right
If the ramp driving your PWM-based controller is not linear, monotonic, or is simply noisy, your DC/DC converter will not perform optimally. It is essential to understand how to achieve the best performance from your system. A typical DC/DC power...
Control car horns in PWM
Past experiences were quite challenging due to the inductive nature of car horns, which require 12A of current, with peak demands reaching 20 to 30A. The current electronic system lacks reliability, given the high intensity. There is a need to...
RS 422 Compatible Indicator
The design involves creating a circuit and programming for a stepper motor controller, developing a speed-controlled DC motor circuit for the propulsion system of the project, and designing a navigation system using a MEMS accelerometer circuit. This section deviates slightly...
Stepper Motor Controller
Stepper motors are beneficial for low-speed, intermediate-torque drive and positioning applications, especially where precise sub-revolution rotor position control is required. These motors are frequently utilized to drive the reels of electromechanical slot machines, position floppy disk drive heads, operate camera...
Dual Axis Stepper Motor Controller
This document details a dual-axis stepper motor controller design and printed circuit board for an equatorial mount. Acknowledgment is given to Bill Prewitt for his assistance in creating this webpage. An encapsulated PostScript file containing the artwork for both sides...
Real-Time Energy Monitor with Arduino and LabVIEW
The system consists of two components: an Arduino board that detects LED pulses and transmits the data via an XBee module, and a PC that receives the data through a USB/XBee module and processes it using LabVIEW, allowing for real-time...
Arduino Based Current Sensor Circuit
The primary component utilized is the ACS712 sensor from Allegro MicroSystems, designed for measuring current. It offers cost-effective and accurate solutions for AC or DC current sensing in industrial, commercial, and communication systems. A precise, low-offset, linear Hall sensor is...
Review of Arduino DAC solutions
An analog output for Arduino can be achieved using a Digital-to-Analog Converter (DAC), commonly implemented with an R-2R ladder circuit. However, this DAC lacks an output buffer, which would enhance reliability and compatibility with various loads. For optimal performance, incorporating...