Analog Oscilloscope Pong circuit

A request to build an analog summing amplifier, preferably utilizing vacuum tubes to achieve the characteristic tube sound. An analog summing amplifier is a circuit that combines multiple input signals into a single output signal. The use of vacuum tubes in...

display and serial interfacing of

This hardware is designed to display the number of cars in a parking lot. The system utilizes a six-segment display; however, a single display is sufficient for the intended function. It employs the segment driver IC SN7447AN along with a...

DIY Homemade Signal Generator with Pulse Width Modulation

Construct a signal generator using readily available components. It should produce a square wave with variable frequency and adjustable pulse width. This device can be utilized for various applications, including DC motor speed regulation, dimming of lamps or LEDs, transformer...

Signal Generators Circuits

Converting periodic waveforms to square waves is essential for extracting clock signals from data, creating waveform generators, and developing timing-pulse generators. A square-wave conversion circuit is more advantageous when the duty cycle of the square wave is variable and controllable....

USB Live Oscilloscope: Main Board

The two input boards (ADCV or digital) are connected to AD_CTL1, AD_DATA1, AD_SUP5V_1, and AD_SUP3V3_1 for the first board, with the second board using the same connections but with a suffix of 2. To transfer sampling data, the 16 digital...

pic based oscilloscope clock

For those unfamiliar with electronics, it is important to understand that an oscilloscope essentially has a single timebase that moves the spot horizontally from left to right with consistent intensity. The vertical deviation corresponds to the input voltage. It becomes...

A four channel X/Y oscilloscope multiplexer

The project involves the design of a custom multiplexer for a four-channel oscilloscope, allowing for simultaneous display of multiple figures with distinct X/Y inputs. The instrument is intended to enhance the functionality of existing oscilloscopes, particularly in conjunction with analog...

Constantly changing light and sound analog controller circuit 04

Constantly changing light and sound analog controller circuit 04 The circuit designated as the "Constantly Changing Light and Sound Analog Controller Circuit 04" is designed to modulate both light and sound outputs in a dynamic manner. This type of circuit...

Crt yoke driver

A 500 mV peak-to-peak triangular waveform centered around ground is applied to the amplifier, resulting in a peak current of 100 mA flowing through the inductor. The circuit involves an amplifier configured to process a triangular waveform signal with a peak-to-peak...