Basic Joule Thief Circuit
#joule thief
#voltage booster
#LED driver
#energy efficient
#battery powered
#low voltage
#transistor
#ferrite coil
#DIY electronics
#power conversion
No description available.
Car Headlight with Delay Circuit
This circuit operates by activating a headlight when the push-button PB1 is pressed. The headlight remains illuminated for a predetermined duration, which can range from several seconds to minutes, before automatically turning off. When PB1 is engaged, capacitor C1 begins...
Cable TV amplifier Using 2 Transistor
This is a cable TV amplifier utilizing two transistors. The amplifier circuit is designed for cable TV systems using 75 Ohm coaxial cables and operates effectively up to 150 MHz. Transistor T1 is responsible for amplification, providing an expected gain...
25 Watt amplifier
Transistors are utilized as current sources, with the base drive for these transistors sourced from the main power supply VA. This configuration ensures that their collector current is proportional to the rail voltage, maintaining the voltage on the cliff-amp collectors...
Sp6648 Flashlight Application
The infrared (IR) LED utilized in a remote control represents a specific application for an LED driver that may have requirements exceeding those of a standard LED driver application. This IR LED driver operates from a 9V alkaline battery, which...
Joule ThiefCircuits
This topic will be locked and will display all of the circuits and some photos of the devices being worked on in the Joule Thief topic. This process will take some time, so patience is appreciated. If any errors are...
The oscillator with electronic tuning of frequency
A schematic diagram of the oscillator is presented in Figure 1. The common-base transistor stage (Q1) amplifies the signal within the positive feedback loop. The positive feedback signal develops across the resistor R1, which is shared by the emitters of...
100w inverter circuit
This is a 100-watt transistor inverter circuit diagram that features a straightforward design. The circuit utilizes only transistors, eliminating the need for integrated circuits. It converts a 12V battery input into a 220V output with a 50Hz square wave signal....
Blinker circuit 2
The circuit depicted in Figure 13-4 utilizes triode control. Two transistors, VTi and VTz, are coupled via a capacitor (C) to alternately turn on and off, producing a flashing light effect. The flash frequency is influenced by the capacitance of...
Joule thief circuit gets overunity
Is a Joule Thief circuit capable of achieving overunity? Joule Thief schematic including scope measurement points.
The Joule Thief is a minimalist circuit designed to extract energy from low-voltage sources, such as depleted batteries, and convert it into a usable output...