LM338 Power Supply 4-30V 20A
#LM338
#adjustable voltage
#regulated power supply
#20A
#4-30V
#high current
#DIY power supply
#voltage regulator
#electronics project
#power electronics
Description: This is a regulated and adjustable power supply that can deliver up to 20A with an adjustable voltage range between 4V and 30V. It is straightforward to construct and utilizes the LM338 voltage regulator.
The adjustable power supply circuit based on the LM338 voltage regulator is designed to provide a stable output voltage that can be fine-tuned according to the requirements of various electronic applications. The LM338 is a three-terminal adjustable linear voltage regulator capable of delivering output currents up to 5A, but with proper heat sinking and additional components, the circuit can be configured to handle up to 20A.
The circuit typically includes the following components: the LM338 voltage regulator, a heat sink to dissipate heat, input and output capacitors for stability, and resistors to set the output voltage. The input voltage should be sufficiently higher than the desired output voltage to ensure proper regulation. A transformer or an AC to DC adapter can be used as the input power source.
To achieve the adjustable output voltage, a pair of resistors is employed in a voltage divider configuration connected to the adjustment pin of the LM338. The output voltage (Vout) can be calculated using the formula:
Vout = 1.25V * (1 + R2/R1) + Iadj * R2
Where:
- R1 is the resistor connected between the output and the adjustment pin.
- R2 is the resistor connected between the adjustment pin and ground.
- Iadj is the adjustment pin current, typically negligible for most applications.
For enhanced performance, it is advisable to include a large electrolytic capacitor at the output to smooth out any voltage fluctuations and provide additional current during transient loads. A fuse should also be incorporated in the circuit to protect against overcurrent situations.
The final assembly should be housed in a suitable enclosure to protect the components and ensure safety during operation. Proper wiring and layout should be maintained to minimize noise and interference, ensuring reliable performance of the power supply in various electronic projects.This is a regulated and adjustable power supply which can deliver up to 20A and adjustable voltage between 4 and 30V. It is easy to build and uses LM338 an..
The adjustable power supply circuit based on the LM338 voltage regulator is designed to provide a stable output voltage that can be fine-tuned according to the requirements of various electronic applications. The LM338 is a three-terminal adjustable linear voltage regulator capable of delivering output currents up to 5A, but with proper heat sinking and additional components, the circuit can be configured to handle up to 20A.
The circuit typically includes the following components: the LM338 voltage regulator, a heat sink to dissipate heat, input and output capacitors for stability, and resistors to set the output voltage. The input voltage should be sufficiently higher than the desired output voltage to ensure proper regulation. A transformer or an AC to DC adapter can be used as the input power source.
To achieve the adjustable output voltage, a pair of resistors is employed in a voltage divider configuration connected to the adjustment pin of the LM338. The output voltage (Vout) can be calculated using the formula:
Vout = 1.25V * (1 + R2/R1) + Iadj * R2
Where:
- R1 is the resistor connected between the output and the adjustment pin.
- R2 is the resistor connected between the adjustment pin and ground.
- Iadj is the adjustment pin current, typically negligible for most applications.
For enhanced performance, it is advisable to include a large electrolytic capacitor at the output to smooth out any voltage fluctuations and provide additional current during transient loads. A fuse should also be incorporated in the circuit to protect against overcurrent situations.
The final assembly should be housed in a suitable enclosure to protect the components and ensure safety during operation. Proper wiring and layout should be maintained to minimize noise and interference, ensuring reliable performance of the power supply in various electronic projects.This is a regulated and adjustable power supply which can deliver up to 20A and adjustable voltage between 4 and 30V. It is easy to build and uses LM338 an..
+15-V-1-a-regulated-power-supply
The power supply receives +20 VDC from the rectifier/filter section. This voltage is applied to pins 11 and 12 of the uA723 voltage regulator, as well as to the collector of the 2N3055 series-pass transistor. The output voltage is sampled...
Mobile voltage regulator
This simple mobile voltage regulator circuit may save your two-meter or CB transceiver if the voltage regulator fails. The 2N3055 should be heat-sinked if the current drawn by the rig exceeds 2 A during transmission. This circuit will do little...
0-30 VDC Stabilized power supply with current control 0.002-3 A
This is a high quality power supply with a continuously variable stabilised output adjustable at any value between 0 and 30VDC. The circuit also incorporates an electronic output current limiter that effectively controls the output current from a few milliamperes...
Self switching Power Supply
One of the main features of the regulated power supply circuit being presented is that though fixed-voltage regulator LM7805 is used in the circuit, its output voltage is variable. This is achieved by connecting a potentiometer between common terminal of...
1.3 - 32 V / 5A Power Supply with Short Circuit Protection with LM338
This is an LM338-based power supply that is uncomplicated and easy to construct. It has been in use for an extended period without any issues. The circuit lacks a current adjustment feature, which has been addressed by incorporating an LCD...
Adjustable Voltage motor controller
The challenge is to control the speed of the motor. One approach is to use a plane, radio, and speed control integrated with the motor, but this is not ideal. Alternatively, mounting the motor on a bench and directly connecting...
Common Hot-Lead Regulator
This circuit derives 5 V DC from 2 AA cells, even at their end-life voltages of 1.05 V, and is approximately 80% efficient, providing 5 V at 4 mA from 2.1 V at 11 mA. IC1 is manufactured by Maxim...
Self switching Power Supply
Self-switching power supply. One of the main features of the regulated power supply circuit being presented is that, although a fixed-voltage regulator LM7805 is used in the circuit, its.
The self-switching power supply circuit utilizes the LM7805 voltage regulator to maintain...
12V DC Dual Power Supply Circuit with IC 7812&7912
The 78W series voltage regulators are designed to handle an input voltage of approximately 35V, while the 24V type can withstand up to 40V. It should be noted that these regulators will not operate effectively with a significant input-output voltage...