4-transistor tracking transmitter
Description: Sorry, I don`t have any data/instructions for use on this schematic. If anyone knows how this circuit works or is used, please drop me an email at click here or use the feedback form. More:
No additional content is available for this schematic description.Sorry, I don`t have any data/instructions for use on this schematic. If anyone knows how this circuit works or is used, please drop me an email at click here or use the feedback form.
No additional content is available for this schematic description.Sorry, I don`t have any data/instructions for use on this schematic. If anyone knows how this circuit works or is used, please drop me an email at click here or use the feedback form.
televition transmitter
The camera is oriented to look out the side of the rocket during launch and downward during descent on the parachute. An optional external mirror can be added to enable the camera to look down during lift-off. The transmitter antenna,...
Wireless Microphone
Q1 amplifies the output from an electret microphone (MIC1). The audio signal is fed into oscillator Q2, which modulates the signal. Additionally, L1 and C1 form a tank circuit designed for operation in the 88-MHz frequency range. The antenna consists...
4-18Mhz-converter
The unit consists of an RF amplifier Q1, a local oscillator Q2, and a mixer Q3. The two frequency bands are covered without a band switch by utilizing an intermediate frequency (IF) of 3.5 MHz. The oscillator operates within a...
14W CW TRANSMITTER
A low-power two-stage FET transmitter designed for the 80-meter amateur band utilizes a Pierce crystal oscillator that does not require an output resonant circuit. A DC milliammeter can be connected across a 150-ohm resistor in the gate circuit of the...
tx atv
This project was developed in collaboration with several other operators, particularly Marco IW1DGG, within a local radio club. The initial goal was to create a simple transmitter capable of providing sufficient power to excite the local ATV repeater. However, suitable...
One Receiver
RF Cafe visitor David M. requested the scanning and posting of an article from the January 1963 edition of Popular Electronics, authored by Philip Hatfield from the Receiving Tube Department of General Electric. The article describes a straightforward design utilizing...
1-2 MHz radio transmitter circuit diagram
A circuit diagram of the T1 is a low-impedance output transformer, featuring a 5000-8 ohm resistor.
The T1 low-impedance output transformer is designed to match the output of audio amplifiers to the impedance of loudspeakers, ensuring optimal power transfer and minimal...
RF Field Strength Meter Circuit
A sensitive and reliable RF field strength meter is an invaluable instrument in amateur radio and radio-controlled model applications. This field strength meter is utilized to align antennas for optimal gain and to determine the transmission range of radio controllers....
Jammer circuit
The frequency jammer operates by generating interfering RF noise centered around a 2.45 GHz carrier frequency. As the power of this noise increases, the signal-to-noise ratio of the wireless communication channel decreases, leading to a higher bit error rate until...