SIMPLE RF REMOTE CONTROL CIRCUIT
#RF
#remote control
#wireless
#transmitter
#receiver
#communication
#simple circuit
#electronics
#DIY
#home automation
No description available.
Tuned Rf Wavemeter
L1 and L2 form a tuned transformer with an optimum turns ratio of approximately 1:3. L2 and C1 are used to tune to the desired frequency. The frequency range can extend from 10 kHz to over 200 MHz, depending on...
50W Tube-Valve SW transmitter
This transmitter operates in the shortwave range from 6 MHz to 22 MHz. Coil L1 serves as the shortwave oscillating coil for the 6SA7 vacuum tube and is commercially available. Capacitor C1 is a variable capacitor with a capacitance range...
50MHz crystal bug
This bugg is based on my previous 3-transistor transmitter. This bugg unit has many advantages. The transmitter uses a crystal 46.515MHz to hold a steady frequency. The frequency can be fine-tuned by some 100kHz. The transmitter can send data and...
MINI_ATV_TRANSMITTER
This low-power NTSC video and sound transmitter is suitable for amateur radio, video handheld transceivers, remote control applications, and surveillance purposes. It features a crystal oscillator-multiplier and a power amplifier. Video modulation is achieved through a three-transistor series modulator. The...
remote control circuit
The remote control circuit comprises two main components: a transmitter and a receiver. The transmitter circuit is controlled by an NE555 integrated circuit (IC), while the receiver operates based on the frequency of the signal emitted by the transmitter. It...
remote control
Step-by-step instructions for adding a remote control interface to F/G CED players, which can be used with a variety of Atari and Sega joysticks, including wireless infrared controllers.
To implement a remote control interface for F/G CED players, the following components...
RF 433MHz - 3 channels remote control
The schematic is very simple and includes, in addition to Nutchip, with its three driving transistor and LED, the radio receiver. The data come from the OUT pin of the receiver and enter the pin REMOTE remote control. The RESET...
2M Transmitter
The transmitter is specifically designed for radio amateurs to function as a radio beacon, delivering a high-quality signal devoid of unwanted harmonics. Transistor T1, in conjunction with crystal X1, serves as a 36-MHz oscillator. Filter L1/C3 prevents the circuit from...
1.5 Volt Tracking Transmitter
A 1.5 Volt tracking transmitter utilizing simple circuits. The current draw for this tracker is 3.7 mA, allowing the 1.5V button cell to have a prolonged lifespan.
The 1.5 Volt tracking transmitter is designed to operate efficiently with a low current...